Znajdź gotowe do importu blueprinty Factorio dla nuclear power, z podglądami, tagami i stringami do skopiowania.
Loading...
A 800MW Nuclear Power Plant designed for a Factorismo MK3 building. Only input is fuel, but requires wells and 5Dim's Mod- New Transport for longer belts Edit - Updated to include a working design...(ironically the design this one was supposed to replace....) since that one will actually support full load and the origi...
Build 5d Fast Underground Belt 30 028
Build 5d Pipe To Ground Mk1 308
Build Fast Miniloader Inserter8
23/11/11 update: Add 8-core 23/4/2 update: Add Version 2 BP 22/6/10 update: fixed the inside support pole provide the power to roboport. How to use it: step1--place down blueprint step2--double click Constant combinator Feature: 1. 4/8 core reactors 2. No waste! 3. Separated electrical network inside 4. 4-core Round 47...
Two plants designed for Space Exploration: * One traditional plant using 480 Steam Turbines * One modern plant using 312 Condenser Turbines Based on city-block concept: fits within 4x1 blocks. Uses 2x6 reactors. Efficiently stores energy as Steam. Stabilizes reactor temp around 768 deg C. Attempts to balance Steam leve...
![[K2 | SE] 2.4 GW Condenser Turbine Nuclear Power Plant with Steam Storage preview](https://factorio-blueprints.com/rendered/k2-se-24-gw-condenser-turbine-nuclear-power-plant-with-steam-storage--0_thumb.webp)
Space and land-based condenser nuclear power plant blueprints with steam storage. Max output is 2.4 GW with steam storage option off. Steam storage is stable at ~1.9GW Output
A nuclear power system designed to expand while being controlled for efficiency you can make a 2*anything reactor for close to the 5x power limit of reactors This is a book that has a version for constructing on land or on water with direct off shore pumps and includes an assembled version I used for testing
Tileable, but must be build over water. Clear a moat, and place the blueprint.
==Vanila== \ --Megalomaniac--\ Tested and fixed for maximum power output. \ Bring 8 pipes of water to each side per copy. \ No circuts, No regulations. \ Good to construct between two huge bodies of water. \ (First reactor will produce less heat/power as it has only 2 reactors next to it. \ Just ignore it... or shorten...
Nuclear power can be tiled infinitely with 2N reactors, but the first two reactors use half as many heat exchangers and turbines than any additional. This is the first row of a 2N setup. Water usage for nuclear power is very high. This setup is designed to be built out over a lake to avoid having to transport water ove...
From Zisteau's video titled "Nuclear Power Without End - Factorio Space Exploration #8" Uses nuclear reactors as heat pipes. Infinitely tile-able. Must be built on water. The substations aren't in the exact same spots but that shouldn't matter. I'm too lazy to make the landfill blueprint, I just use the pump anywhere m...
This four reactor nuclear plant uses the new factorio 2.0 ability to read temperature and fuel settings directly from the reactor. The plant is completely lossless despite not having any steam storage. It will reload once the temperature is below 600 degrees, all the reactors are empty, and there is one fuel cell ready...
2.7 GW power max. BETA VERINON !! Update coming soon.
This is a 26 reactor nuclear power plant. It is designed to be build over a lake, land-filling in most of the lake, but leaving a 5 wide strip of water for the offshore pumps that provide water to the heat exchangers. This has no circuitry to have it run slower than full power to save fuel; if you can build this, you l...
Nuclear power can be tiled infinitely with 2N reactors. This is the turbine layout for such a setup. Empty spaces can be easily filled with accumulators (and maybe tanks?). The blueprint is intended to be oriented such that the end with the roboport on it is farthest from the heat exchangers (but it will work either wa...
2GW with RS latch.
Simple Nuclear Power - 40 MW Inputs: - 1x Water - 1x belt Uranium fuel cell Output: - 1x belt Used up uranium fuel cell A solar panel is needed to start up the power plant (to power the inserters)
Fuel cell production not included, but steam and temperature indicators are. \ Intended for use with rail blocks.
A symmetric and chainable reactor design for Factorissimo. Uses 28 reactors (after neighbor bonuses) to produce about 720MW. Some stats: 312 Pipes 244 Heat Pipes 132 Turbines 112 Heat Exchangers 32 Blue Belts (These don't actually need to be blue) 28 Underground pipes 16 Fast Inserters 8 Blue Undergroundies 8 Reactors...
around 480 MW, additional steam storage and accumulators included, looks beautiful
Yeah, so, title says it all
1.12GW Nuclear Reactor
4-reactor (464 MW) nuclear power array adapted from Nilaus' master class on nuclear power to only add fuel to each reactor when that reactor is out of fuel and its temperature drops below 650°C.
Square Nuclear Power Setup with Steam Buffer for use with Solar Power combined. 480MW nominal 838MW max Output (144*5.82MW). Nuclear Reactors need for initial startup manual insertion of fuel, afterwards, given a steady flow of new fuel and/or no overflow of used fuel, the reactors operate completely automatic.
Nuclear setup by Nilaus
You can take this raw (if you have waterfill) dublicate it nearly forever (you can also use logistic robots instead of belts in order to use it even more). In this way you can build a power plant that uses only 4 reactors with a bonus of 200% but nearly endless reactors with a bonus of 300%. If you don't want to use as...
Znajdź gotowe do importu blueprinty Factorio dla nuclear power, z podglądami, tagami i stringami do skopiowania.
A 800MW Nuclear Power Plant designed for a Factorismo MK3 building. Only input is fuel, but requires wells and 5Dim's Mod- New Transport for longer belts Edit - Updated to include a working design...(ironically the design this one was supposed to replace....) since that one will actually support full load and the origi...
23/11/11 update: Add 8-core 23/4/2 update: Add Version 2 BP 22/6/10 update: fixed the inside support pole provide the power to roboport. How to use it: step1--place down blueprint step2--double click Constant combinator Feature: 1. 4/8 core reactors 2. No waste! 3. Separated electrical network inside 4. 4-core Round 47...
Two plants designed for Space Exploration: * One traditional plant using 480 Steam Turbines * One modern plant using 312 Condenser Turbines Based on city-block concept: fits within 4x1 blocks. Uses 2x6 reactors. Efficiently stores energy as Steam. Stabilizes reactor temp around 768 deg C. Attempts to balance Steam leve...
Space and land-based condenser nuclear power plant blueprints with steam storage. Max output is 2.4 GW with steam storage option off. Steam storage is stable at ~1.9GW Output
A nuclear power system designed to expand while being controlled for efficiency you can make a 2*anything reactor for close to the 5x power limit of reactors This is a book that has a version for constructing on land or on water with direct off shore pumps and includes an assembled version I used for testing
Tileable, but must be build over water. Clear a moat, and place the blueprint.
==Vanila== \ --Megalomaniac--\ Tested and fixed for maximum power output. \ Bring 8 pipes of water to each side per copy. \ No circuts, No regulations. \ Good to construct between two huge bodies of water. \ (First reactor will produce less heat/power as it has only 2 reactors next to it. \ Just ignore it... or shorten...
Nuclear power can be tiled infinitely with 2N reactors, but the first two reactors use half as many heat exchangers and turbines than any additional. This is the first row of a 2N setup. Water usage for nuclear power is very high. This setup is designed to be built out over a lake to avoid having to transport water ove...
From Zisteau's video titled "Nuclear Power Without End - Factorio Space Exploration #8" Uses nuclear reactors as heat pipes. Infinitely tile-able. Must be built on water. The substations aren't in the exact same spots but that shouldn't matter. I'm too lazy to make the landfill blueprint, I just use the pump anywhere m...
This four reactor nuclear plant uses the new factorio 2.0 ability to read temperature and fuel settings directly from the reactor. The plant is completely lossless despite not having any steam storage. It will reload once the temperature is below 600 degrees, all the reactors are empty, and there is one fuel cell ready...
2.7 GW power max. BETA VERINON !! Update coming soon.
This is a 26 reactor nuclear power plant. It is designed to be build over a lake, land-filling in most of the lake, but leaving a 5 wide strip of water for the offshore pumps that provide water to the heat exchangers. This has no circuitry to have it run slower than full power to save fuel; if you can build this, you l...
Nuclear power can be tiled infinitely with 2N reactors. This is the turbine layout for such a setup. Empty spaces can be easily filled with accumulators (and maybe tanks?). The blueprint is intended to be oriented such that the end with the roboport on it is farthest from the heat exchangers (but it will work either wa...
2GW with RS latch.
Simple Nuclear Power - 40 MW Inputs: - 1x Water - 1x belt Uranium fuel cell Output: - 1x belt Used up uranium fuel cell A solar panel is needed to start up the power plant (to power the inserters)
Fuel cell production not included, but steam and temperature indicators are. \ Intended for use with rail blocks.
A symmetric and chainable reactor design for Factorissimo. Uses 28 reactors (after neighbor bonuses) to produce about 720MW. Some stats: 312 Pipes 244 Heat Pipes 132 Turbines 112 Heat Exchangers 32 Blue Belts (These don't actually need to be blue) 28 Underground pipes 16 Fast Inserters 8 Blue Undergroundies 8 Reactors...
around 480 MW, additional steam storage and accumulators included, looks beautiful
Yeah, so, title says it all
1.12GW Nuclear Reactor
4-reactor (464 MW) nuclear power array adapted from Nilaus' master class on nuclear power to only add fuel to each reactor when that reactor is out of fuel and its temperature drops below 650°C.
Square Nuclear Power Setup with Steam Buffer for use with Solar Power combined. 480MW nominal 838MW max Output (144*5.82MW). Nuclear Reactors need for initial startup manual insertion of fuel, afterwards, given a steady flow of new fuel and/or no overflow of used fuel, the reactors operate completely automatic.
Nuclear setup by Nilaus
You can take this raw (if you have waterfill) dublicate it nearly forever (you can also use logistic robots instead of belts in order to use it even more). In this way you can build a power plant that uses only 4 reactors with a bonus of 200% but nearly endless reactors with a bonus of 300%. If you don't want to use as...
Skopiuj string blueprinta, otwórz bibliotekę blueprintów w grze i wybierz import stringa. Po wklejeniu Factorio utworzy blueprint albo książkę blueprintów.
Wybierz blueprint z paska szybkiego dostępu lub biblioteki i ustaw duchy budynków. Roboty zbudują je, jeśli masz materiały i zasięg roboportów.
Porównaj podgląd, tagi, materiały i opis. Sprawdź wersję gry lub mody, jeśli układ wygląda na wyspecjalizowany.